<div class='quotetop'>QUOTE(RedHeartbeat &#064; Feb 18 2006, 02&#58;39 PM) [snapback]44807[/snapback]</div>
No rubber or anything, just a steel cup that has three bolt holes to mount to the engine block and a long bolt that goes through it and the rubber engine mounts that should be bolted to the frame crossmember. If at a salvage yard, try to get all the nuts and bolts when they pull the mounts. The main bolt is about 5" long and should have a nut to come with it.

Was your truck a V6 or V8?
[/b]
Ok, It sounds like I know what I need. I went and ordered the V8 engine side mounts online. Frame was a V6 frame, but I have the V8 mounts off the original truck, w/ new poly inserts, bolted on. Just need to get some new bolts and I should be all set then. It was hard to tell exactly what I needed to get w/ the diagram they had online.