I think you have the 0411 computer? It should be no big deal for nelson to tune your computer to work. Someone correct me if I'm wrong
I think you have the 0411 computer? It should be no big deal for nelson to tune your computer to work. Someone correct me if I'm wrong
Josh ----- 95 Z71 ecss -6.0 swap finished 10k miles ago, nelson tuned, built tranny, 2800 converter, 4.56s truetrac
2000 z28 a4 longtubes, true duals, ported throttle body, ls6 intake, slp lid (lost in divorce lol)
79 camaro small block street car 11.60 @ 116 (sold)
Im sure nelson can handle the tune, also to get it down to working level just take the tires off and bring it down til the hubs are almost to the ground then you can use a trans jack.
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
I did the math and even if i put some 28" tires on the thing it would still be too high for a trans jack, any other ideas? are there any mid level trans jacks out there? also where would I be able to rent one?
I think he meant leave the wheels and tires off completely. You can set some blocks under the axle tubes or something
2000 z28 a4 longtubes, true duals, ported throttle body, ls6 intake, slp lid (lost in divorce lol)
79 camaro small block street car 11.60 @ 116 (sold)
Yes that's what I meant.
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
I did some measurements and I dont think that will work, it would be close though, I havent looked at a ton but the floor trans jacks I have seen only reach 26to 28" and It would still be higher than that. Any idea on where I could rent one though? Im not even sure where to get one without buyin one.
Posting Permissions
Reply With Quote