93 1500 w/ 5.3L & 5 speed swap

[91blkstpsd]

Got some work done. Put on tensioner and found a belt that seems like it'll work good. Took the truck around the block too. Runes good but scanned it and saying both 02 sensors are bad... So got a few lil bugs to work out but its gettin close! Gonna be fun ride too!
Heres a few pics of where I'm at. Also changed out the couplers to black and cleaned up some more underhood.

[Chevy-Art]

Good job, looks factory.

[Old Nash]

Looks great, Drew.

[91blkstpsd]

Good job, looks factory.

Thanks, thats what Im going for!

Looks great, Drew.

Thank you sir.

[pacobeagle]

Several questions:
1. What A/C kit is that and are you happy with it and it's setup?
2. What intake kit is it?
3. What radiator fan setup are you using?

Lastly, this thing looks great. Would love to see a walkaround video of it, pointing out the highlights!

[91blkstpsd]

Several questions:
1. What A/C kit is that and are you happy with it and it's setup?
2. What intake kit is it?
3. What radiator fan setup are you using?

Lastly, this thing looks great. Would love to see a walkaround video of it, pointing out the highlights!

1. The AC compressor is the stock 93 one. The bracket kit is from Josh Powers. Do a little searching for his name and there are several threads with it on here and few other sites. So far I like the setup but I havent got to run it much at all.
2. The intake is for a 6.0L Hummer H2. I did some digging and test fitting and found this one works great for these LS engines in and OBS truck. I havent seen anyone else using one so maybe it'll catch on. haha I did not want some rigged looking PVC pipe or even the alum tubing on this one.
3. The radiator came from a late 90's 3/4 ton Chevy truck. Its a 34" radiator whereas the stock was 31" plus this one is thicker. Its a direct fit to any OBS but will also need the top mounts from the donor truck. I went out and measured my 06 and it had the same size radiator in it so I found some take off E-fans on eBay from an 06 and they fit great. I had to trim the top ears off of them however. My buddy is making me a radiator cover so then I an mount the top. Only the bottom of them is mounted in these pics is why is sticks a little away from the radiator.

Thanks. I will do some more pics and vids once I get few more things done. Its def came a long ways from where it was at.

[T-Stark]

can i get a part number for that intake? that looks like it fits real good in there

[T-Stark]

and is ur exhaust fully welded? or is it bolted at the headers? if so what flanges did you use

[91blkstpsd]

can i get a part number for that intake? that looks like it fits real good in there


and is ur exhaust fully welded? or is it bolted at the headers? if so what flanges did you use

The intake is a Bully brand. Its fairly cheap but looks and works good. Lines right up with the factory spot on the fender. I did have to cut about 1/2"-3/4" off the end of the tube to fit it but thats easy enough. Part # IK-701

My exhaust is fully welded on. I didnt want any leaks or anything and the way he ran it I can still pull the trans out if needed without having to take down the exhaust.

[T-Stark]

thanks for that part number, and it is pretty cheap i found it for like 70 bucks shipped. not to bad

and it will be awhile for me to get that video for ya..... i twisted my driveshaft in half after the stall and longtube install, witch tore a hole in my gas tank... it ran good for about 3 miles but thats all she wrote lol