Need HELP TBI

[94ChevyLS1]

I have a 94 Chevy truck that i am going to put a 350 engine in with TBI Injection. I got the part cheap and went that route. Now i need help on tuning the truck. It will have the Holley TBI injection unit Edelbrock TBI performer intake manifold a set of headers and a cam. I need to know were i can get a chip for the truck made? Were to get a adjustable fuel pressure regulator? and any other help or comments

[kerrige]

Wow I have no idea........ bump

[2boosted]

I really want to help, but I had no clue. I heard long time ago a friend bought one chip from JET

Other way will be www.TunerCat.com

I knew they had chip burners and software for the OBDI chevys.

Hope this helps

[88stepside]

check out the Thirdgen forum. Agj fuel pressure reg is already on the Holley unit, and as a bonus the adjustment knob is where you can reach it. Don't waste your money on buying a chip. Either have it dyno tuned by someone with a chip burner or do it yourself. Check out Moates for chip burning equipment. Datalogging software is available for free or small donation on the internet.
Or you can buy a wideband, chip burner, plus the datalogging software and tune it all on a laptop.

[RedHeartbeat]

Turbocity out of Cali and Street an Performance both used to burn chips for them. Might call and see if they still do.

[DBRODS]

Also Brian at TBIchips.com can work with you on getting the tune dialed in.. Long road ahead!

[88stepside]

Also Brian at TBIchips.com can work with you on getting the tune dialed in.. Long road ahead!

I took that road five years ago and learned alot. My experience with Brian was ok but I learned to do what he was doing by reading Thirdgen and datalogging myself. Tuning software for the '7747 ecm is easy to find and step by step instructions for everything involved have been well documented by the TBI Camaro guys. Good luck with your build.

[94ChevyLS1]

Thank you for all the information has been very helpful.