im asking cuz im stupid about this...
should i get my next tune for the 408 updated to be SD?
Please school me.
im asking cuz im stupid about this...
should i get my next tune for the 408 updated to be SD?
Please school me.
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
yes with atleast minimal single 4" air tube. the tubing in most CAIs will become a restriction for a healthy 4xx cube motor
2002 Lightning - GT headed 5.5Litre w/ Twin 7665s
2002 Silverado - 427Lsx w/ Twin gt4202s
2010 Silverado crewcab Z71 - 5.3litre w/ procharger
2000 Wrangler - 5.3litre with some stance
2014 Xsport- 3.5 Eco boost
412 Motorsports
it ain't that I'm too big to listen to the rumors, It's just that I'm too damn big to pay attention to 'em..That's the difference
Thnx quick.. i have a volant CAI right now..
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
kiss it by if you want airflow. a good healthy motor requires as much as into it as possible or you will create a vaccum as rpms rise and lose KPA [lose power] ppl think you cna just toss in a motor without every partof the build that matchesOriginally Posted by MidwestSS
2002 Lightning - GT headed 5.5Litre w/ Twin 7665s
2002 Silverado - 427Lsx w/ Twin gt4202s
2010 Silverado crewcab Z71 - 5.3litre w/ procharger
2000 Wrangler - 5.3litre with some stance
2014 Xsport- 3.5 Eco boost
412 Motorsports
it ain't that I'm too big to listen to the rumors, It's just that I'm too damn big to pay attention to 'em..That's the difference
Quick Is correct ... That's where most gains are with sd tunes
my 410 needs a single 5" tube, but decided to have a twin 4" built
Simple: 408 on steroids!
single digits coming soon!
my 410 needs a single 5" tube, but decided to have a twin 4" built. Exactly what I was thinking ! Two 4 inch charge pipes Might flow a ton more air. Then what I had before
how big of a throttle body are you running? 4" tube should easily support a 102mm TB since they're both the same size, right?
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
im running the volant intake, whatever size that is on my 90mm tb
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
think about it this way...
take a 1" diameter piece of house about 1" long and blow through it, very easy right?
now take another 1" diameter hose and make it about 3' long and throw in a bend or two and blow through it again, not so easy huh?
01 Silverado
Posting Permissions
Reply With Quote