+ Reply to Thread
Results 1 to 5 of 5

Thread: dyno'd 6.0 in 01 blazer

Hybrid View

  1. #1
    Join Date
    Apr 2008
    Location
    Birmingham, AL
    Posts
    3,626
    60hp from a 100 shot?????
    01 Silverado

  2. #2
    Join Date
    Jan 2007
    Location
    Stafford, VA
    Posts
    255
    Quote Originally Posted by sprayedenali View Post
    60hp from a 100 shot?????
    If it's set up for a later turbo install, it's going to have less compression. N20 and lower compression won't play as well as a higher compression motor (at least this is my theory and I'm sticking to it )
    - Paul J.
    2006 Silverado LT3 L33 Z71 - Mods: K&N Air Filter; Taylor Wires
    2008 Azera Limited - Mods: (Yah, wife's car ... not happening)
    (SOLD) 1994 Camaro Z28 - Mods: (Too many to mention)
    (SOLD) 2004 Suburban 5.3L Z71 - Mods: Flex-a-Lite 292 Monster Fan
    (SOLD) 2000 Silverado 5.3L Z71 - Mods: (NTIKO)
    (SOLD) 1991 Suburban 350 2WD - Mods: (NTIKO)

  3. #3
    Join Date
    Mar 2011
    Location
    Summerville, SC
    Posts
    55
    4 degrees of timing was pulled. I am running br8 plugs gapped to .035.

    I also used stock jetting for the nitrous outlet plate.

    Sorry, I haven't posted the graph yet. I am at the s-10 supernationals racing. We are data logging it and trying to get it down the track. Running into 120+ degree IATS right now and trying to get it to stop pulling timing. Running 7.70's with this setup. I am also trying to get the suspension and tires dialed in. I went to spray it last night at the track with the 150 shot and I only picked up .1 with it. I believe I am having either a solenoid issue or a switch issue. I will get it figured out today though.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts