That would be a good set up and a good price! Any way you can get a lq4 or lq9 or even ls1. I'm gunn a use my PRC 5.3 stg2.5 heads and my fast Lsxrt 102. So i guess 6.2 is out, and a ls2 would bump my comp up pretty high with these heads
That would be a good set up and a good price! Any way you can get a lq4 or lq9 or even ls1. I'm gunn a use my PRC 5.3 stg2.5 heads and my fast Lsxrt 102. So i guess 6.2 is out, and a ls2 would bump my comp up pretty high with these heads
chevyboy.520
06 ecsb 5.3, FAST LsxRT 102, FTI cam! LT's, tru dual, magnaflow, 3400 stall, Performabuilt lvl2, 4.10s!
PRC stg 2.5 5.3 heads Awaiting to go on!
Ill see what I can drum up I do have a 2002 LS1 I need to go over it everything spins freeley but i havent dropped the pan yet to check it out, I will reman it and look to get 1,800.00 out of the short block once rebuilt, this includes ballancing, line hone, rings, bearings, well you get it. lol
I can get 6.0L iron block,s as well. ill check on them, all my engins are GM take outs so I pay good $ for them and have yet to have one with major isues like spun rod bearing and such.
This screams Travis..![]()
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
Ya if you could pm me the price on a ls1 or a lq9 or lq4 Short blocks. And I'll see when id be able to get one
chevyboy.520
06 ecsb 5.3, FAST LsxRT 102, FTI cam! LT's, tru dual, magnaflow, 3400 stall, Performabuilt lvl2, 4.10s!
PRC stg 2.5 5.3 heads Awaiting to go on!
Well scrub the L92, I do have some good parts off of it, Let me know what you need. Rods Junk, Crank Junk, Block Junk.
BUMP of the week!!!
Do you have any 6.0's? I have someone here in Tucson looking for one
chevyboy.520
06 ecsb 5.3, FAST LsxRT 102, FTI cam! LT's, tru dual, magnaflow, 3400 stall, Performabuilt lvl2, 4.10s!
PRC stg 2.5 5.3 heads Awaiting to go on!