If the stem height is .6mm higher you also have to compensate for the 1.7:1 ratio on the rocker arm. The .6mm is about .024" longer at the valve end and .014" at the pushrod end.
If the stem height is .6mm higher you also have to compensate for the 1.7:1 ratio on the rocker arm. The .6mm is about .024" longer at the valve end and .014" at the pushrod end.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote