+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 22

Thread: My Dads Build.

  1. #11
    Join Date
    Oct 2007
    Location
    Bandera, TX
    Posts
    2,921
    Quote Originally Posted by arnsimmons View Post
    Just out of curiosity could you tell that the piston was broken, when driving and did it use oil
    didnt use oil at all or smoke.... just had a little clatter like a lifter tap...

    Quote Originally Posted by MidwestSS View Post
    im doin a 408 build. would it be in my best interest to get rockers such as those?
    im goin for more power.. but more importantly stablity
    just some type of upgrade. if nothing else upgrade the stock rockers with the harlen sharp or comp kit. they lose needle bearings pretty regular..... but for a little more u can get a little more power and upgraded rockers....
    single digit street truck


    for build info

    http://www.ls1truck.com/forums/my-ga...cs-garage.html

    The best advice I have ever heard:... Only take B( . Y . )ST advice from someone that is CURRENTLY running a turbo setup close to, or bigger than what you want......

  2. #12
    cuz im lazy.. can u give me a link to where u got yours?
    Sponsored by Taylor Wires!
    Sponsored by PowerMaster!!
    Sponsored by FROZEN BOOST!
    Sponsored by US Speedo!

  3. #13
    Join Date
    Oct 2007
    Location
    Bandera, TX
    Posts
    2,921
    Quote Originally Posted by MidwestSS View Post
    cuz im lazy.. can u give me a link to where u got yours?
    http://cgi.ebay.com/ebaymotors/Scorp...Q5fAccessories
    single digit street truck


    for build info

    http://www.ls1truck.com/forums/my-ga...cs-garage.html

    The best advice I have ever heard:... Only take B( . Y . )ST advice from someone that is CURRENTLY running a turbo setup close to, or bigger than what you want......

  4. #14
    Join Date
    Mar 2007
    Posts
    1,705
    real nice !!!

  5. #15
    Join Date
    Feb 2008
    Location
    Kanada
    Posts
    39
    How did you know that the piston was broken. Was it only after the
    engine was taken apart. Did the engine vibrate. Why iam asking
    this,is i think i might have hurt my engine. Tires spun on ice and the motor
    over reved in 1 st gear (6500 rpm max ), then i heard what sounded like a stick going around
    and around a steel drum (loudly) for about 1 second. The sound has never came back.
    This happened 1 week ago. My engine is non boosted and no nitrous
    Last edited by arnsimmons; 02-14-2011 at 03:31 PM.

  6. #16
    Join Date
    Oct 2007
    Location
    Bandera, TX
    Posts
    2,921
    i was kind of waiting for a piston to go. 25k miles of 10 psi and my dads heavy foot were pushing the limits. Im sure I could have done a leak/comp test. But my dad was looking for a reason to build a forged motor anyways, it could have been a rocker arm and it still would have been built like it is...lol.... no clue what your noise was. goodluck tho
    single digit street truck


    for build info

    http://www.ls1truck.com/forums/my-ga...cs-garage.html

    The best advice I have ever heard:... Only take B( . Y . )ST advice from someone that is CURRENTLY running a turbo setup close to, or bigger than what you want......

  7. #17
    Join Date
    May 2009
    Location
    Plainfield, IL
    Posts
    2,036
    Don't the scorpions have a tendency to fall apart as well?

    I remember looking into them a couple years back (before finding this site) and seeing a bunch of threads about them, thought someone on here had a set let go now that long ago as well.

    Seems like a lot of the fbody guys swear left/right up/down by yella terra's.
    blown transmissions are about as useful as 97% of the guys on this forum

  8. #18
    Join Date
    Oct 2007
    Location
    Bandera, TX
    Posts
    2,921
    Quote Originally Posted by oleshifty View Post
    Don't the scorpions have a tendency to fall apart as well?

    I remember looking into them a couple years back (before finding this site) and seeing a bunch of threads about them, thought someone on here had a set let go now that long ago as well.

    Seems like a lot of the fbody guys swear left/right up/down by yella terra's.
    havent heard of any falling apart, they have a lifetime warranty. Im running yella terras but at half the cost the scorpions are just a cheaper option. i guess only time will tell....
    single digit street truck


    for build info

    http://www.ls1truck.com/forums/my-ga...cs-garage.html

    The best advice I have ever heard:... Only take B( . Y . )ST advice from someone that is CURRENTLY running a turbo setup close to, or bigger than what you want......

  9. #19
    Join Date
    May 2009
    Location
    Plainfield, IL
    Posts
    2,036
    http://www.ls1truck.com/forums/power...s-up-guys.html

    that's the thread i remembered...I guess it IS jetmech so who knows
    blown transmissions are about as useful as 97% of the guys on this forum

  10. #20
    Join Date
    Sep 2005
    Location
    Austin Tx.
    Posts
    13,138
    looks sick Mic!
    1951 3100
    1984 C10

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts