You can send them to me and I'll mill them for free RHB. I have 4 Bridgeports and an Emill.

I totally agree with you guys and this all goes back to the LS6 cam write up that I posted. How is MTI installing these heads and cam with stock 7.4 pushrods? I'm going to call some other shops and talk to them.

Here is what the LS6 head info indicates - 88958622 - LS6 CNC Ported Assembled Aluminum Cylinder Heads .055" machined from deck surface of head-Intake pilot pin bosses will need chamfered, and 7.325" pushrods should be utilized.

This indicates to use shorter pushrods with these heads. I'm feeling a little ignorant here.