There is a marine manifold, but they are very hard to find, extrememly expensive when you do find one, and they weigh about 100 pounds.
There is a marine manifold, but they are very hard to find, extrememly expensive when you do find one, and they weigh about 100 pounds.
[IMG]https://images.app.goo.gl/XLfskemekXBo5VfS7/IMG]
www.tjc.edu
Why not use a TPI set up instead of the LT1. You can get a TPI base made for the Vortec heads and you wouldn't have to change the water pump or distributor setup.
If you are still looking for a complete LT1 intake, I have one. Intake, rails TB injectors. $70+shipping.
Mike
http://kds-performance.com
94 Silverado Z71 SCLB 4.8L LR4 Daily Driver
93 GMC Sierra 2WD LS V8 Swap dun, run, rusted, stripped & junked
1979 Caprice Coupe - LS Swapped - 11.76@115.8
I actually decided to go with a tuned port injection manifold on this project. I sincerely appreciate the offer though, its a steal.
[IMG]https://images.app.goo.gl/XLfskemekXBo5VfS7/IMG]
www.tjc.edu
Posting Permissions
Reply With Quote
