i want to get an aftermarket alarm with a remote start anyone know of a decent alarm. just looking for something that will get the job done. also is it something i can do myself i dont trust many people with wiring on my truck after i got screwed at custom sounds. my truck has the factory alarm if that helps any.
Last edited by lechez71; 08-12-2010 at 06:09 PM.
1982 c10 lsx swaped, NP tuned, true duals, 4:11s, trutrac, e-fans, CAI
I hear CLifford stuff is nice http://www.clifford.com/
i like viper or code alarm. i got a diagrams incase you need help, i did mine on my own took me about 3 hours
do you have to remove all door panels to run wire?Originally Posted by fubutx
1982 c10 lsx swaped, NP tuned, true duals, 4:11s, trutrac, e-fans, CAI
i did not take off any panels, all i got off was the knee bolster and the panel where the lever to take off the foot brake
clifford, viper, code alarm; all good brands. you only need to remove the knee bolster and metal cover behind it. There are plenty of pics in my garage that may help with how easy it is. all of your power and ignition wires can be tied together during prep for the alarm and all of the other needed wires can go to the BCM. I highly recommend cutting unneeded wires long and taping them together in case you need/want them later. You can find door triggers, park lights, headlights, horn, lock and unlock all at the BCM. with all of your power/ignition wires you can route them kinda behind the fuse box, between the back of the fuse box and metal sub-dash. There you will also find a harness that plugs into the fusebox and goes across the metal brackets to the key cylinder, this harness has all starter and ignition wires. yellow is starter, pink is ign 1, white is ign 2, orange is heat/ac. Power comes from the key cylinder and goes straight down the steering column, it will be red/white. At the BCM(located under steering column); +lock:light blue, +unlock:white, -horn:black +parking lights:brown, factory disarm: lt green, I can't remember the door triggers but you will have to diode isolate them to connect to the door trigger input on the alarm because otherwise the dome override option can interfere/bypass door trigger. TEST ALL OF YOUR WIRES BEFORE YOU CONNECT, I ASSUME NO RESPONSIBILITY FOR ANY OF THIS INFORMATION
2005 black Yukon XL SLT - traded in for me wife's new Fusion (GM sucks these days)
2002 black Yukon SLT (the skinny sister)
1969 green Pontiac GTO (Layla, AKA the black sheep)
INSTALLS AND MORE.. http://www.ls1truck.com/forums/my-ga...-low-life.html
Sticky/broken gauges? I can help. PM me for details.
Posting Permissions
Reply With Quote
