+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 28

Thread: ALL transmission codes on??? need help

  1. #11
    Join Date
    Dec 2008
    Location
    South Carolina
    Posts
    794
    thats weird...when mine was throwing those codes the trans wouldnt work..have you switched pcm's lately or anything??
    2008 GMC Sierra SLE....370ci LY6 with some goodies SOLD
    1995 C2500- LS1 swap with a mp112
    build thread- http://www.ls1truck.com/forums/lsx-t...-ls1-swap.html

  2. #12
    Join Date
    Oct 2009
    Location
    Katy ,Texas
    Posts
    167
    no ,i havnt touched the pcm, this one is from allen ,had it on for id say 3 months or so. im starting to think its something with this pcm but honestly im lost and dont know what else to do.
    06 silverado crew cab 4.8L
    STS Kit W/turbonetics BB 60-1 .81AR T4 and intercooler 10psi
    Nelson custom tune
    built 4L60E-hopefully it lasts
    2500 stall-Hughes converters
    42LB injectors
    3.5 Magnaflow exhuast
    6inch lift on 35x12.50s

  3. #13
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Try putting 12v to the pink trans power wire straight from the fuse block or battery with a fused link. Clear the codes and drive it around and see if the codes come back. The loss of 12v from the steering column would be an intermittent problem sometimes.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  4. #14
    Join Date
    Dec 2008
    Location
    South Carolina
    Posts
    794
    wouldn't loss of power to the trans from the ignition cause the trans to act up? he says the trans is working fine so im confused..
    2008 GMC Sierra SLE....370ci LY6 with some goodies SOLD
    1995 C2500- LS1 swap with a mp112
    build thread- http://www.ls1truck.com/forums/lsx-t...-ls1-swap.html

  5. #15
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Depends if the power loss is intermitant or a hard failure

    Could be a bad pcm ground or broken ground wire. Tug on the grounds and see if the insulation stretches.
    Last edited by RedHeartbeat; 08-02-2010 at 10:15 AM.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  6. #16
    Join Date
    Oct 2009
    Location
    Katy ,Texas
    Posts
    167
    ill gve it another look at later tonight and see if that helps, if not ill just use a jumper wire and see if it does anything
    06 silverado crew cab 4.8L
    STS Kit W/turbonetics BB 60-1 .81AR T4 and intercooler 10psi
    Nelson custom tune
    built 4L60E-hopefully it lasts
    2500 stall-Hughes converters
    42LB injectors
    3.5 Magnaflow exhuast
    6inch lift on 35x12.50s

  7. #17
    Join Date
    Oct 2009
    Location
    Katy ,Texas
    Posts
    167
    well.....no point in testing anything lol, went to the store this morning on my way to work,it was driving fine ,shut it down,went inside ,came out and turned it on and hen i put it in D it felt like i had a 18 wheeler trailer hooked up to it, i think its stuck in 2nd or 3rd, pretty sure there is something wrong with the shift solinoid B , so im gonna try to reset the computer and see if it frees up so i can drive it to this a hole once again to fix it. geez man ,im doing the 80E conversion this is the most frustrated thing ive ever gone through, rebuilt 2 times, fixed 5 times within 4 months is ridiculous!
    06 silverado crew cab 4.8L
    STS Kit W/turbonetics BB 60-1 .81AR T4 and intercooler 10psi
    Nelson custom tune
    built 4L60E-hopefully it lasts
    2500 stall-Hughes converters
    42LB injectors
    3.5 Magnaflow exhuast
    6inch lift on 35x12.50s

  8. #18
    Join Date
    Dec 2008
    Location
    South Carolina
    Posts
    794
    thats the same thing mine did...i still had second third and reverse tho. the trans is in limp mode. put it in second gear manually and it should pull off a little better... see if you have voltage to the trans on the pin E
    2008 GMC Sierra SLE....370ci LY6 with some goodies SOLD
    1995 C2500- LS1 swap with a mp112
    build thread- http://www.ls1truck.com/forums/lsx-t...-ls1-swap.html

  9. #19
    Join Date
    Jun 2010
    Location
    West Texas
    Posts
    406
    Yeah limp mode. Be patient, Im sure its something very minor.
    RUN WAT U BRUNG!!!!

  10. #20
    Join Date
    Oct 2009
    Location
    Katy ,Texas
    Posts
    167
    i reset the computer and now its back to driving right but the ck eng light is still on, i gotta work today so im gonna try to get some time tomorrow to take it to them.
    06 silverado crew cab 4.8L
    STS Kit W/turbonetics BB 60-1 .81AR T4 and intercooler 10psi
    Nelson custom tune
    built 4L60E-hopefully it lasts
    2500 stall-Hughes converters
    42LB injectors
    3.5 Magnaflow exhuast
    6inch lift on 35x12.50s

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts