thanks, i figured that would work.... i still need to buy that adhesion promoter and primer.... im thinking, auto zone?Originally Posted by Red03SilSS
thanks, i figured that would work.... i still need to buy that adhesion promoter and primer.... im thinking, auto zone?
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
Paint store
DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31
2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts
I did all the wood grain in my wife's vehicle which is same interior as yours. I used steel wool to ruf it up and then used Krylon's Plastic Fusion paint and clear. Seems to be holding up great so far. The chevy onyx black is cool, when I sprayed my harley myself, that is what I had mixed up...Good Luck.
--2013 CC Z71, Edelbrock charged, cam, long tubes, 4.5" Zone, 285/70/18 KM2s on Gear Big Block, Kenwood system, LineX, Retrax, Katskinz, NFab.
--2012 Dmax CC Z71, Cognito UCAs, braces, Fox 2.0, LineX, Nfab, Retrax, Ranch Hand Front/Back, Custom Katskinz, Black Gear 18x9 wrapped in 285/70/18 Toyo MT.
started sanding yesterday
put the promoter and started priming/sanding/priming/sanding this afternoon...... i work mornings so daylight isnt very much. right now im concentrating on the a/c vent on the driver side where the light switch is on.
the plastic around the radio is also sanded down, needs a bit more before i can spray on the adhesion promoter. will be posting up pics when im done with the driver side a/c vent, hopefully by tomorrow night.
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
Im using the filler primer, then sand it down smooth, then more filler primer. After about 4 sets, when i look closely, looks like theres a bunch of little pores.
Any help? it feels smooth to the touch. Should I keep spraying primer, and sand it down untill I cant see the pores anymore?
Im unsure if I should just spray another 2 coats of promoter and straight to paint, then clear. HELP!!!!
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
The promoter is only to make the primmer stick to the plastic. You only use it once, before you prime. I would do about 4 coats of primmer and sand down smooth till there isnt any more texture, or what your calling pores. Then you ready for paint
DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31
2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts
but this is the 4th time, do I need a 5th or 6th? what could it be that im doing wrong?
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
i read on a paint thread on GMFS that the guy used promoter before the primer, and after sanding the primer down smooth, he used promoter again just before painting.
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
Posting Permissions
Reply With Quote
