ohhhh ok. I was thinking he was full out with the tvs. I have a good friend here with practically the same truck, and a similar setup. so I was curious what the other guy was running. You have a strong truck though it seems. All in the setup.
ohhhh ok. I was thinking he was full out with the tvs. I have a good friend here with practically the same truck, and a similar setup. so I was curious what the other guy was running. You have a strong truck though it seems. All in the setup.
07 nnbs ecsb 5.3, full bolt on, Blown. 6.0 swap going in now, and maybe 100 shot. To be continued...
nope just a Pat G spec'd cam, OBX LTs/ORy/magnaflow exhaust, LS3/7 TB, Truckshop tune, R TVS1900. he went 13.1@103 letting out. he's going back tonight and try for a 12.8-12.9 pass, so am i.
i have a lot more in mine than he doesbut i think its bc i dont have a big enough converter or exhaust set up. im happy with my truck though it just cant chase down 11sec cars on the street lmao.
2008 GMC CCSB 6.2/6L80e swap
Gen IV 5.3/60e swap 1994 ecsb W/T
June 12th SCR outside of Baton Rouge, La
flat footed it:
R/T .693
60' 1.882
330 5.424
1/8 8.382
MPH 83.64
1000 10.907
1/4 13.061
103.84
1800rpm stall up
R/T 348
60' 1.864
330 5.424
1/8 8.391
MPH 83.34
1000 10.922
1/4 13.078
MPH 103.84
i have no idea the DA' or anything like that.
2008 GMC CCSB 6.2/6L80e swap
Gen IV 5.3/60e swap 1994 ecsb W/T
With 103-104mph trap speeds you are NOT going to run any faster than what you are running now. Sorry, but at your weight and the power your making thats it.
so now it's time to add parts. 102mm intake/tb, 1 7/8" LTs 3.5" exhaust, WCCH heads, 3600 converter.
looks like that's a good dream. it'll never happen. looks like it's time for a 100shot at the 1/8
my injectors are at 103ish% at 6800 rpm. i think i need more injector before i do anything else. also my a/f ratio is 12.0ish from 3k-6800 shouldnt it be closer to 11.5 or something? i know nothing about all this. sorry
Last edited by keniff; 07-21-2010 at 09:55 AM.
2008 GMC CCSB 6.2/6L80e swap
Gen IV 5.3/60e swap 1994 ecsb W/T
Why wait till the 1/8th to spray it? Spray it off the line and go all out!Originally Posted by keniff
so now it's time to add parts. 102mm intake/tb, 1 7/8" LTs 3.5" exhaust, WCCH heads, 3600 converter.
looks like that's a good dream. it'll never happen. looks like it's time for a 100shot at the 1/8
my injectors are at 103ish% at 6800 rpm. i think i need more injector before i do anything else. also my a/f ratio is 12.0ish from 3k-6800 shouldnt it be closer to 11.5 or something? i know nothing about all this. sorry
T-RAV99 GMC | 5.3 | Skinny White Guy Tuned
stock tranny lol
2008 GMC CCSB 6.2/6L80e swap
Gen IV 5.3/60e swap 1994 ecsb W/T
Posting Permissions
Reply With Quote
