Can anyone help me out!

[arkansashunter08]

I have a 06 rcsb silverado with a 5.3. Its fully bolt on from PRC heads on down except for camshaft and stall. Would TR224/224 be the best cam for mid to high range? Any suggestions for a better cam? Plus in thinking about going with a PTC stall.

[Show&Go]

224/224 would probably need a 3600 stall to see its full potential. Also 4.10s probably. If you wanted to go smaller a 3k stall would work good with a tr220.

[casey23]

I help with a few trucks... 224/224 is basic camshaft if you ask me... I have an 2004 ex cab ls6 with 234/240 with a yank3600 and it was pretty good all motor... pushed full body ex cab LT almost in the 12s on motor... But i drove it last night 40-50 miles.. Truck acts ALOT different going from 28" slicks to a 30" street tire... 598 598 228/232 114 dont foget good springs and pushrods

[06Sierra2]

i plan on ordering the tsp224r cam hopefully in the near future with 3200 stall and 3.90s or 4.10s. what size stall were you gonna run?

[skeet]

226 or 228 cam 3800 stall

[Botlfed]

nawzzz!!!!!!!!!!!!!!

[arkansashunter08]

i plan on ordering the tsp224r cam hopefully in the near future with 3200 stall and 3.90s or 4.10s. what size stall were you gonna run?

I plan on running a 3000 or 3600.

[el_cabby]

try one of the new lsr lobes from comp, i am planning on swapping one in on my truck soon.

[Wtfan18]

226 or 228 cam 3800 stall

ill be running the TSP 228r .588/.588 112lsa in my 5.3

[Three6GMC]

the 224 is a pretty standard cam down here in the valley alot of people are running it with a 3200 stall with gears and get some good results out of it.........