Here is what he is talking about.
Here is what he is talking about.
cjriojas:if you're weather man is a 5 gallon bucket, YOUUUUUUUUUUU might be a redneck
danger_ranger83: I see now why it cost so much to get a harness made... FML
2boostedSilverado: I like Casey's rear end, I want to chat with him about it
when using the puller incorrectly it is possible to break the tabs off. I put a 6" long 3/8" socket extension in the threaded hole and push against it. The balancer has a flange on the front of it that many have tried to push against to pull the pulley off, resulting in broken pulley or puller.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
thanks dude i thought about that but didnt wanna take the timeOriginally Posted by Duct_tape123
Here is what he is talking about.
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
Thats the first thing i tried! the puller wont stay hooked because when you put tension on it.. the arms just collapse to the inside... Physics takes over.. and you can't defy physics... and i don't have the little flats inside like most do.. i have 2 balancers here with the flats cut on the inside of the balancer. this broken one doesn't have them. its a 1999 model balancer
-2005 1500 Z71 ECSB 6.0 swap, Cooks Racing 4L80E, NP261HD, Carolina Driveline 5" shaft, CST Tie-Rods, front mount 76mm, Livernois hot pipes, Circle-D 258mm (~3500), Mallory 2-step, 100 Dry shot, 750CC RC Eng. Inj, Nelson Tuned, 4.10's, all through a STOCK 10-bolt
Posting Permissions
Reply With Quote
