Quote Originally Posted by robznob11 View Post
did you miss the fact that i have 4:10 richmond gears moser axles and a mini spool, also running 1 3/4 primary long tubes with 3" collectors and 2.5 exhaust, aero chambers and dumped behind the cab, Im running a tray mounted aganst the cowl hood for a ram air effect even though it is not supercharged, Yes i will be stepping up the pushrods chrome molly ones, by the way i pulled a 496 stroker package out of this truck to run a ls motor i do know a little about building hotrods , and yes i do plan on stepping up the heads to 799 or 243 in the future that may give me 30 hp across the board but the cam will work with eather comp ratio, and one last thought I talked to texas speed today and they recommended that i not go past a 228r because I will give up too much bottom end with such a heavy truck, I told comp when they speced the cam i was looking for a fat and flat tq curve not top end hp that way i can be far out and they have to reel me in, oh yea i also told them this is more of a power tour type ride it aint gonna be any fun if i cant trust it on a long haul, I have hade plenty of race cars that bearly squeek by inspection and can cruse to sonic and back, pretty much spit out all other rides but i want this one to be a hot rod/ cruser with a big set of nuts.(if you go too large with a converter you loose driveability not to mention you burn down your tranny in traffic I mean if i wanted it right id put a trans brake in it not to mention i probably would not run an overdrive behind the motor)
LMAO, trying to school Dave on whats what lol