5.3 in ranger?

[danger_ranger83]

no there can be up to 2500 psi in power steering

hmm...u said ''can be''...so i MIGHT be about to get away with it lol

[truckinL33]

hmm...u said ''can be''...so i MIGHT be about to get away with it lol

On the low side you'll prolly be over 1000 psi.

[danger_ranger83]

so like 5 hose clamps on each side? or adapters to get the chevy lines into a ford steering box?

[RedHeartbeat]

a lot of NAPA or tractor stores can rebuild your hose to work, just take your GM and FORD ends with you and they can often put new hose between the two and crimp new clamps on it to prevent leaks.

[truckinL33]

Hose clamps will shoot the hose off, ask me how I know.

[danger_ranger83]

a lot of NAPA or tractor stores can rebuild your hose to work, just take your GM and FORD ends with you and they can often put new hose between the two and crimp new clamps on it to prevent leaks.

alright sweet...im gonna have a ranger with hydroboost

[danger_ranger83]

talked to the guys at trans-dapt and these are the only mounts he suggested so i think ill go with these

Trans Dapt Performance Products - Biscuit Style Motor Mounts

[danger_ranger83]

this made my day sad

Ford Ranger Pre-Runner Project

and so did this

1989 Ford Ranger Chevy Ls1 Engine Photo

but these were done by custom shops so i still feel special about doing it myself