+ Reply to Thread
Results 1 to 10 of 13

Thread: 4L80e won't move

Hybrid View

  1. #1
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    yeah, sounds like it needs to be torn down to see whats messed up in there.

    ATSG book says "no park"

    Detent lever = incomplete travel or misaligned
    Actuator rod = Rabbit ears bent, disconnected or broken
    Dentent spring = mispositioned
    parking prawl = broken
    prawl shaft = broken
    park bracket = bent or broken
    park bracket bolt = loose or broken
    Front internal gear = splines broken
    manual shaft = flats not parallel
    Last edited by RedHeartbeat; 03-13-2010 at 09:39 PM.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts