+ Reply to Thread
Results 1 to 10 of 504

Thread: Official NBS 4.3v6 to GEN 3 V8 swap Guide

Hybrid View

  1. #1
    Join Date
    May 2009
    Location
    hot & windy
    Posts
    1,117
    Quote Originally Posted by Frankiels3 View Post
    Hey Guys,
    Im brand new here and i Just purchased a 06 Chevy Silverado Reg Cab 2wd 4.3 V-6
    5 Spd.

    Its slow. I no Like. I wanna Go Fast.

    Heres my question/ Could be my plan:

    6.0 Goat motor with its T-56 Tranny. Complete Swap.
    I wanted to keep the Truck Manual.
    Is the Goat 6.0 the same as Truck 6.0 ( i know its not the same, but is it close?)

    What do you think?
    I think It would be fast and awesome. I already know im going to pay a pretty penny for the 6.0/T-56 combo, so thats been taken into consideration.

    Thanks A heap Guys!
    the 05-06 GTOs had the LS2 which is similar but, at the same time, very different from the LQ4 or LQ9 used in the trucks. i don't have a bunch of time to explain, but if you do a search for these engines, you'll find a bunch of info around here.

    good luck on the swap! it sounds fun
    00 FRC - just top end, exhaust, and a hot-air intake
    99 Sierra - 5.3 / 5spd
    ↓ click the pic for the build ↓

  2. #2
    So it would be easier (and a lot cheaper) just to use a 6.0 lq4? In that case would I just keep my 5speed? I do know that chevy offered the 5speed behind 6.0 motors in 06 but I think it was in half cabs, so I assume it's a beefier 5speed. Could I just beef mine up?

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts