Originally posted by RedHeartbeat@Nov 7 2005, 09:25 AM
Too bad they don't have a way to fog the top end cleaner in through the throttle body opening. From the oil coked buildup I have seen in F-body intakes, there is a need of some way to do it. When I have the intake off I always steam clean them on the inside to get all the nasty crap out that is brought in through the PCV intake.
3M top engine clean works just this way. We were under contract with them for 2 years. I swear its the best on the market. NAPA used to sell it. The problem is there is a special quick connect tool that taps the can, witch is under pressure. It does not come with the kit So beware if you buy this kit to do it yourself.

I do have an extra one if someone is really interested.

Our new kits just use a IV bottle with a valve to control flow. (fast drip almost running, rpms about 2k) There needs to be a T Valve inline to let air in so it atomizes. You could easily make this yourself and run your cleaner of choice through any vacumm line. I prefer the PVC but the brake booster line is the lazy way to do it.