Feeler: 1994 ext cab 1500 w/ 2002 5.3/4l60E installed - Central Florida

[flattopwill]

Ya well I'm sure we can work somethin out. I'm excited bout it so lmk when we can meet if we decide to do so after I check out the pics.

[SpecV44]

I went out and took a video with my phone, it is 5 megapixels, but idk how it turned out. Im working on uploading it now.

I found my video camera and charger, so if the phone doesnt work, I will use that.

I also took a 2nd video of it idling, then rev up, then it coming down and dying (when releasing the throttle).

[SpecV44]

Ok, so I got the videos uploaded. The sound is a little jacked up when the phone is too close to the manifold, but I think it will do. If you wish, I can charge and use my video camera, which worked fine at the drag strip, no distortion on the sound. Instead of taking pictures I just did a walk-around with the video, but if you want still shots, I can do that too.

[flattopwill]

Wow you werent a kiddin bout havin a buttload of stuff on the inside and bed of the truck lol. Some of the underhood and undercarraige shots were a little distorted probably from the mix of bright sunlight and dark areas. If you could grab some better shots of those with either your vid cam or a better still shot cam that would be awesome.

Was the y-pipe installed in that vid? It looked like it was open manifold or somethin but I couldnt tell.

Do you plan on doing anything to it before I get it?
Fixin the fuel tank strap?
Is there a reason why the front grill, etc. are off?
Do you have the matching wheel and tire for the front drivers side?

Good luck at the track!

[SpecV44]

y pipe not installed, need to weld in the cat replacement pipes, will do that before delivery. the manifold side of the y-pipe is bolted to the manifolds for o2 sensors, I just need to weld in 2x 12" pieces of pipe in place of the cats.

front grill removed to install aux factory trans cooler, PS cooler

I do have the matching wheel, tire had a leak.

I will take care of stuff as I have time. I will see about getting the fuel gauge to work again (like I said, I think it is a ground), and I will attempt to fix the strap. If not, I will have a replacement to go with the truck.

i will get true pics and a true video when i get home tonight.

[SpecV44]

here is the link to the new pictures and the new videos. the ecu seems to be learning, as it didnt die this time after revving.

http://s34.photobucket.com/albums/d1...20and%20video/

[SpecV44]

photobucket isnt wanting to upload my new 135mb video, so i am uploading it to youtube

HERE is the youtube link

the audio still broke up a little bit, but not horrible

[flattopwill]

looks good. that vid is MUCH better. Thnks

[SpecV44]

oh, i forgot, pay no attention to the wires underneath the driver's dash, those are for the tach and water temp gauge up on the dash lol, those arent dash wires

[SpecV44]

GRRRR, i hate technology. I took way more than 18 pictures, but for some reason they didnt get transferred to my computer. I will get them put up now