99-02 trucks use the same cruise system as the OBS trucks, just a different length cable length from the module to the throttle.
Install a OBS turn stalk with switch and the appropriate wiring to the module and you will be good to go.
99-02 trucks use the same cruise system as the OBS trucks, just a different length cable length from the module to the throttle.
Install a OBS turn stalk with switch and the appropriate wiring to the module and you will be good to go.
gotta get all the wiring for the cruise thats inside the cab, too.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Sweet, cause the yard only wants $15 for the cruise module. Ok so i'd have to get the turn signal stalk off, have to figure that one out. And i'm guessing the wiring your talking about goes from the stalk to the module, and fuse box. Am I missing anything?
Why couldnt you just tap in the vss signal that your cruise box needs from the genIII ecm?
1992 rcsb k1500 lq4 4l80 swap done.If anyone has questions feel free email as I'm not on here very often. bobby_seitz@yahoo.com
It will come from there. His truck wasn't originally equipped with cruise, so he has to add the components.Originally Posted by 92 6.0
Ohh ok I thought his truck already had it.
1992 rcsb k1500 lq4 4l80 swap done.If anyone has questions feel free email as I'm not on here very often. bobby_seitz@yahoo.com
Ok what do you mean by adding components? I i use the cruise module and turn signal from my year truck it should all plug right up. Is there something else I have to add besides a longer cable?
Posting Permissions
Reply With Quote