5.3 swapped into 94 chevy tune

[keniff]

i was wondering if someone can point me in the right direction of tuning my truck.

im building a 5.3/60E combo for my 94 chevy. i have the Nelson Performance wiring harness. i need to know what i need to turn off or change to make my truck run on the first try. im wanting to try my hand at tuning an doing a safe tune to learn on...i know i can get a tune from NP but thats more money than i can afford right now thanks to this build. i know it doesnt have all the emissions stuff anymore so can/will that keep my truck from running?

any help is great an worse come to worse ill just have to call you Allen an hopefully youll share some tuning knowledge with me.

[George C]

i was wondering if someone can point me in the right direction of tuning my truck.

im building a 5.3/60E combo for my 94 chevy. i have the Nelson Performance wiring harness. i need to know what i need to turn off or change to make my truck run on the first try. im wanting to try my hand at tuning an doing a safe tune to learn on...i know i can get a tune from NP but thats more money than i can afford right now thanks to this build. i know it doesnt have all the emissions stuff anymore so can/will that keep my truck from running?

any help is great an worse come to worse ill just have to call you Allen an hopefully youll share some tuning knowledge with me.

do you have HPtuners? if so i can help you out however you are Allen's customer first so i dont want to intrude on any of his ppls. If for some reason allen cant assist you feel free to PM me

[keniff]

thanks quik...i honestly dont know..its my friends stuff hes not off when im off so i cant wait on him to come pass an plug it up. ill scan it an email it to him...worse come to worse ill have to take a vacation to get this handled lol.

[keniff]

anyone know exactly what i have to turn off to allow the truck to start?

its an 00-02 ecm im not sure.

[keniff]

im using HPtuner....anyone knows?

[WARLOCK]

Ull need to disable to security I know that much.

[George C]

set vats to none is a start

[keniff]

so delete the security, turn off VATs, delete EGR, rear o2 sensors then start tuning for the cam?

[farmtruc]

Hey, no problem Keniff.

System-> Vats off
DTC's - turn off every emission code you don't need. Uncheck the ON/OFF and set to No error reported for all codes not needed.

That will allow the engine to start and have no codes.

As for cam, idling, af ratio, timing, that's a long discussion.

[keniff]

Hey, no problem Keniff.

System-> Vats off
DTC's - turn off every emission code you don't need. Uncheck the ON/OFF and set to No error reported for all codes not needed.

That will allow the engine to start and have no codes.

As for cam, idling, af ratio, timing, that's a long discussion.

THANKS Allen, if any more problems ill call an see what you advise. if it comes to it ill just send you my computer to get it close to my cam