bare with me...these are the pics i sent my friends when i remembered to take a pic with my phone...im uploading them through my iphone to photobucket so i may get the image links wrong.
fuel pump
fuel pump accessories
fuel pump hotwire kit
Nelson Performance Custom wiring harness
block surface before heads went on, plus the LS7 lifter trays an lifters installed
what it looked like after i put the heads, adjusted the lifters, an put the valve covers on. notice i used my old DOD valley cover just incase i had to lay something on it or bumped the oil pressure boss
just getting it into the truck
under its own weight an bolted in
all the wiring narrowed out...wow
the tapped LS7 valley cover. i used a 3/8 NPT tap a 3/8" to 1/8" brass reducer with liquid teflon from work
just a close up of what i used
close up the wiring sorted out, sensor installed
intake installed
TB installed 90mm FAST dbc
with the intake cover
an i call this the Money Shot
Reply With Quote