So I finally got the warranty on the rockers underway and made an interesting discovery. The guy I talked to at Scorpion said that I had a "weak" batch of rockers. The rockers I was using were not quite strong enough for my application. I bought and installed them back in February and Scorpion started making stronger arms a few months later - strong enough to withstand 400lbs open spring pressure. A big part of the arm failing was the patriot dual gold valve springs I run - 375lbs open spring pressure. Either way, the rockers are under warranty even though part of it was my fault
. Bottom line, Scorpion's FORMER configuration was not quite strong enough, but the new ones are.
Originally Posted by jetmech
So I finally got the warranty on the rockers underway and made an interesting discovery. The guy I talked to at Scorpion said that I had a "weak" batch of rockers. The rockers I was using were not quite strong enough for my application. I bought and installed them back in February and Scorpion started making stronger arms a few months later - strong enough to withstand 400lbs open spring pressure. A big part of the arm failing was the patriot dual gold valve springs I run - 375lbs open spring pressure. Either way, the rockers are under warranty even though part of it was my fault
2000 Silverado ECSB- 5.3 CAI, Pacesetter LTs, ORY- Pipe, Magnaflow XL, E-fan, Ported T/B , Nelson Tuned, Built 4l60e, Circle D Stall, 3.42s G80, 2-4 Drop, Hertz Highs, Rockford 501s 
Reply With Quote