just got my trans go shift kit in for my 4l80e and on web site it says you need to order a seporater plate so i did when i opened shift kit box it looks like there is on already in it the one i ordered is a single plate and the one in the shift kit is like three thin ones riveted together? any ideas
06 GMC 2500HD EC/SB 6.6 LBZ allison 6 speed, 4" MPRP turbo back, QS2 on the 70HP tune
2000 chevy2500 RCLB 6.0
4L80E,4.10s,aem intake,180 t stat,ported tb,descreened maf, true duals with high flow cats and 40s dumped, lt285/75r16 MTs,an a hypertech programer for now saving for a custom tune now its dead
15.9 at 88 with mudd tires
1973 chevy k10
1989 chevy k1500 stepside
I use the single plate.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
if i may how come?
06 GMC 2500HD EC/SB 6.6 LBZ allison 6 speed, 4" MPRP turbo back, QS2 on the 70HP tune
2000 chevy2500 RCLB 6.0
4L80E,4.10s,aem intake,180 t stat,ported tb,descreened maf, true duals with high flow cats and 40s dumped, lt285/75r16 MTs,an a hypertech programer for now saving for a custom tune now its dead
15.9 at 88 with mudd tires
1973 chevy k10
1989 chevy k1500 stepside
No possible leaks between plates. Get the new Torlon (plastic) checkballs to replace the steel ones.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
were you get those
06 GMC 2500HD EC/SB 6.6 LBZ allison 6 speed, 4" MPRP turbo back, QS2 on the 70HP tune
2000 chevy2500 RCLB 6.0
4L80E,4.10s,aem intake,180 t stat,ported tb,descreened maf, true duals with high flow cats and 40s dumped, lt285/75r16 MTs,an a hypertech programer for now saving for a custom tune now its dead
15.9 at 88 with mudd tires
1973 chevy k10
1989 chevy k1500 stepside
you can get them online or go to your local Transtar dealership.
4L60E Performance Transmissions from PATC
#30CB. Torlon Check Ball, .250", 10 per bag. The new check balls (.250") are made out of tough wear- resistant imidized plastic. The imidized plastic balls seal better than steel balls because they conform to the separator plate ball seats. Steel check balls are hard and heavy, wearing separator plate ball seats from the repeated high impact of the ball on the seat. Elastomer or rubber check balls seal well. However, the elastomer material wears, reducing the size of the ball. Fits 700R4, 4L60E, 200-4R, TH400 and 4L80E transmissions. Sold 10 per bag. Cost $7.00
Last edited by RedHeartbeat; 12-27-2009 at 10:22 PM.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
will do thanks also anything else to do or get when installing shift kit also got a 40,000gvw tranny cooler at the same time
06 GMC 2500HD EC/SB 6.6 LBZ allison 6 speed, 4" MPRP turbo back, QS2 on the 70HP tune
2000 chevy2500 RCLB 6.0
4L80E,4.10s,aem intake,180 t stat,ported tb,descreened maf, true duals with high flow cats and 40s dumped, lt285/75r16 MTs,an a hypertech programer for now saving for a custom tune now its dead
15.9 at 88 with mudd tires
1973 chevy k10
1989 chevy k1500 stepside
I have the same shift kit for my upcoming 80e swap. It has the same three plates riveted together. How much was your single plate?
2000 Silverado ECSB- 5.3 CAI, Pacesetter LTs, ORY- Pipe, Magnaflow XL, E-fan, Ported T/B , Nelson Tuned, Built 4l60e, Circle D Stall, 3.42s G80, 2-4 Drop, Hertz Highs, Rockford 501s
2004 Buell XB12s
Originally Posted by LamboDoNoMo
from oregonperformancetransmission
TRANSGO GM 4L80E 1991-UP SEPARATOR PLATE
Code: TRG-48-PLT-01
Price: $24.82
Last edited by hillbilly6.0; 12-28-2009 at 04:13 PM.
06 GMC 2500HD EC/SB 6.6 LBZ allison 6 speed, 4" MPRP turbo back, QS2 on the 70HP tune
2000 chevy2500 RCLB 6.0
4L80E,4.10s,aem intake,180 t stat,ported tb,descreened maf, true duals with high flow cats and 40s dumped, lt285/75r16 MTs,an a hypertech programer for now saving for a custom tune now its dead
15.9 at 88 with mudd tires
1973 chevy k10
1989 chevy k1500 stepside
Thank you sir.
2004 Buell XB12s
Posting Permissions
Reply With Quote