+ Reply to Thread
Results 1 to 7 of 7

Thread: 06 5.3 trans into a 02 5.3

Hybrid View

  1. #1
    Join Date
    May 2008
    Location
    North Texas
    Posts
    217
    Quote Originally Posted by txarkitekt View Post
    The only thing you need to swap over is the Prindle switch. The 99-02 trucks had the 2 plug setup, and the 03-07 Classic trucks had the single plug setup.
    my 03 has the dual plug on it. my dad broke it while i was in the process of putting it back in the last time and luckily the local trans guy was still at his shop at 8 o'clock at night and had one on the shelf
    [Today 11:15 AM] MidnightRider: justin= generalvehicles.com moderator

  2. #2
    Join Date
    Feb 2007
    Location
    Fort Worth
    Posts
    9,578
    Quote Originally Posted by ss wrecker View Post
    my 03 has the dual plug on it. my dad broke it while i was in the process of putting it back in the last time and luckily the local trans guy was still at his shop at 8 o'clock at night and had one on the shelf
    OP edited. I knew it was either the 03 or 04 model year when they changed Prindle switches.

    Yeah, when taking the Prindle connectors out (on the 2 plug setup), make sure to get a lighter and heat them up for like 10 seconds before trying to get them unconnected. If you don't heat them--you WILL destroy the connectors, and possibly the entire Prindle switch.

    2000 ECSB 6.0L
    TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts