03 dbw harness to dbc

[cjcalhoun]

ya i was going to use the old style fuel system and then just do an egr delete because i havent found an 03 up with egr i dont want that crap anyways

[cjcalhoun]

also i found a harness for a 2006 2500 hd 4x4 with a 6.0 and 4l80e is there anyway to make it work

[Frenchy]

As far as I know it'll just be set-up for an 80e and maybe a clutch fan? I'm not sure

[cjcalhoun]

ok would i have to change conectors to run the 60e also does the 4x4 run throu the engine harness

[cjcalhoun]

heres the link where i found it http:
//cgi.ebay.com/ebaymotors/2006-Chevy-Silverado-Sierra-6-0L-Engine-Wire-Harness_W0QQitemZ250528162682QQcmdZViewItemQQptZMo tors_Car_Truck_Parts_Accessories?hash=item3a54a463 7a

[Frenchy]

Not sure about the 4x4 part, probably. I'd leave it set up for the 80e though, I read in another thread you were askin about Mic's twin turbo setup, so if you're gonna go that route you will kill 60e's and end up going 80e anyway so you might as well just go for it right from the start.

[cjcalhoun]

ya i might do that but i dont have a 4l80e ill proly leave it without a turbo till i get more money dont have alot to start with and have a kid on the way just like to look into all my options before i start the build

[cjcalhoun]

Ok working on getting an 06 harness,intake,and accesories. Not shure yet if it will have the tac module and the pedal. Will any year tac module and pedal work with the 06 harness and intake?

[PitchBlackC3]

The 2006 pedal will have a different plug than the 2003-05. The pedals work the same and you can interchange them, but the plug is different. 2006 has the same plug as the GENIV trucks.

[cjcalhoun]

ok so i would have to get the tac wiring and pedal as a unit right