I am about to buy pacesetter LT's and there off road y. Do you guys have good luck with the clamps sealing? Also when my truck is at wot and goes to shift it makes squealing noise from the front of the motor. My shift rpm is 5800. It sounds like a belt squeal or maybe my intake sucking air? idk. has anyone ever had this problem? I have an afe stage 2 cold air. any help would be great thanks
Sounds like a belt squeak possibly. It could be the tensioner not strong enough anymore or the belt might just be old and hard.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Yea thats What i was thinking. Could It be the ac or proley the main belt?
Probably the main belt or tensioner/idler pulley, but do not count out the A/C belt.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Posting Permissions
Reply With Quote
