is it possible to repin the connector for a 4l80e and see if that solves the problem
is it possible to repin the connector for a 4l80e and see if that solves the problem
try disconnecting it first and see if the engine still dies
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
You have to add an additional wire to go from an 80e harness to a 60e harness. It can be done but its not as easy as converting from 60e to 80e since all you have to do is unplug one wire and move another from its original location to the place you unplugged the other. I did that conversion on Bud8Fan's harness this weekend, took about 20 minutes under the hood at the PCM to move the wires around.Originally Posted by yaya
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote