Since Mine Are Deleted,,can I Completely Remove Them And Plug The Y Pipe?or Do They Need To Stay Plugged In?if I Can Remove Them Completely What Size Plug Would Fit In Its Place?
Rear Oxygen Sensors
Since Mine Are Deleted,,can I Completely Remove Them And Plug The Y Pipe?or Do They Need To Stay Plugged In?if I Can Remove Them Completely What Size Plug Would Fit In Its Place?
Yes Zach, you can completely remove them. Tape up the connectors well and zip-tie them to the frame.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
x2 on removing them and them just plug the o2 bungs
damm!! alrite i should have removed them a long time ago,there probly no good by now.thanks...
Screw zit-ties. Just unplug them from the connectors. That's what I did on mine.Originally Posted by txarkitekt
T-RAV99 GMC | 5.3 | Skinny White Guy Tuned
don't get me wrong zach i don't want to come off as a smart azz but what is it hurting by leaving them there.
Leaving them on there can mess with stuff. By leaving them on there (and even with them turned off) can mess with the grounding of the circuit. When you screw them into the exhaust bungs, you complete the ground circuit. If for any reason they touch the frame, it may throw things off a bit....since the electrical system on our trucks is ground-based.
I am not saying it WILL happen, but I have seen it happen 2 times on two different trucks with the rear O2s turned off in the tune.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
wow good to know and i don't have mine in since the pacesetter ory doesn't have the bungs.
well thing is bro i threw a 02 code and it was the passenger upper 02,,and all my 02s are the same i couldve just swapped 02s but its probly burnt,instead of buying a 140.00 new one.in other words i wouldve had 2 good spare 02s if i had removed them...
now knowing the info stated above,,they r really coming off,,,anyone know the plug thread size?
Zach threw a code because he had them plugged in, but not grounded (bolted to exhaust).
Zach, I am almost positive the plug thread size is 18mmx1.5mm
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Posting Permissions
Reply With Quote
