mine was fine for 2 days till it went out, just a thought
Might as well fix your wheel speed sensor too Trav, it's 20 minutes (And thats including a piece of the sensor breaking off in the hub and fishing it out). But price a hub too when you do it. sometimes the hub with the sensor is cheaper.
Last edited by Frenchy; 10-16-2009 at 08:28 PM.
2006 SilveradoLittle Black Bitch
Travis--try leading the entire blinker circuit with LEDs. Put one in back and two up front. As long as you are running all LED lights on the blinker circuit, it should be fine. If not, you need some inline resistors.
As for the CC--the CC module and cable could be fine--and it is the blinker/wiper/CC stalk that could be bad. So many things to consider here. Start with the simple stuff, then work to the more complicated.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
you know, i had the same problem with my 02 rcsb.
when i first got it, it had a new headlight/blinker/cruise stick installed, the blinkers and whatnot worked fine but the cruise didn't work at all. never. i got so pissed off i started checking fuses, pulled the cover off the make sure everything was plugged in. nothing. and then it dawned on me. . . . manual windows and doors, no side moulding, steel wheels. hell this is a base model truck, i bet it doesn't even come with cruise. sure enough, i popped the hood and there were empty studs on the firewall where my cruise control module should be and only one cable on the TB.
so i tell people i saved weight by not getting cruise.
[IMG]https://images.app.goo.gl/XLfskemekXBo5VfS7/IMG]
www.tjc.edu