Quote Originally Posted by jetmech View Post
ABSOLUTLY YES! If you are going to upgrade valve springs, it is a VERY good idea to install hardened pushrods. It is cheap insurance and they are the weakest link in valve train. Not only that, when you are in the process of replacing vavle springs, the pushrods are fully exposed. All you have to do is pull the old rod out and drop the new one in - takes about 34.7 seconds for all eight once the rocker arms are off.
Hmm, you must be slow. Ive heard of all eight rods being swapped in only 32.6 secs. You need to practice more, bro j/k