+ Reply to Thread
Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 46

Thread: My 03 Silverado SS rebuild....Project ReSSurection

  1. #1
    Join Date
    Apr 2008
    Location
    London Ky
    Posts
    56

    My 03 Silverado SS rebuild....Project ReSSurection

    I have been working on a 03 silverado ss that was wrecked and I am in the process of rebuilding it. I bought it in april of this year and almost have it ready to go. The damage to the truck was the front end, frame, cab and both passenger doors. I bought a 99 Z-71 frame and a 02 cab for the rebuild and didnt know the frames were a bit different but it all worked out. I had to cut the 99 to 02 bumper frame brackets off and replace them with the 03 to 06 bumper brackets so I could mount the newer front end on it. I decided to go with the 06 grille and hood for the truck because I like the look of the taller hood and the grill looks better too(IMO). The hood was made by the local fiberglass guy and has the 02 SS camaro scoop molded into the it and is functional. I also had to rewire the whole truck as the wiring in the 03 was different from the 02 and the hardest part was the cab, this thing looked like a rats nest of wires but I finally got everything where it goes and it all works. Here is a link to all the pics of the build from start to now.

    http://s305.photobucket.com/albums/n...%20SS%20build/

    Let me know what you think and any suggestions on what paint sceme would help because I am up in the air as of now on which way to go with it. I thought of a 2 tone, mabe a sunset orange and black but want to come up with something original.
    Last edited by 99ImperSSonator; 10-17-2009 at 07:43 PM.

    99 SILVERADO, 5.3, CATBACK EXHAUST DUMPED, K&N COLD AIR INTAKE

  2. #2
    Join Date
    Jun 2008
    Location
    Santa Paula, CA
    Posts
    357
    Frankenstein truck...looks good though....u wudnt even know it went through all that just by looking at it
    Quote Originally Posted by sleeper1500 View Post
    Done took 'er down to the Pep Boys an pimped it out.
    03 silverado 5.3L
    H.I.D's, 40 series Flow dumped , CAI, 2in Shackles

    03 Tahoe- C.A.I, magnaflow, h.i.d's...more to come

  3. #3
    Join Date
    Apr 2008
    Location
    London Ky
    Posts
    56
    Quote Originally Posted by socal1 View Post
    Frankenstein truck...looks good though....u wudnt even know it went through all that just by looking at it
    Yea, it looked like they hit an oak tree with the passenger side frame horn. I got it for cheap though and as it sits now I have about $9500.00 in it.

    99 SILVERADO, 5.3, CATBACK EXHAUST DUMPED, K&N COLD AIR INTAKE

  4. #4
    Join Date
    Dec 2004
    Location
    San Antonio, TX Area
    Posts
    1,741
    Man that looks good.
    "ALisSa1 Silverado"
    1990 Chevrolet RCSB 2002 Chevrolet Camaro LS1/4L60E
    Scrimpin Ain't Easy
    ( . Y . )


  5. #5
    Join Date
    May 2009
    Posts
    149
    You did an awesome job with that truck

  6. #6
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Good job. Looks like a lot of work. I see in you pics you have an elf in pink help you do the work, they're always nice to have around.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  7. #7
    Join Date
    Apr 2008
    Location
    London Ky
    Posts
    56
    Quote Originally Posted by RedHeartbeat View Post
    Good job. Looks like a lot of work. I see in you pics you have an elf in pink help you do the work, they're always nice to have around.
    Yea, she gave me alot of company while I worked on the truck. She would had me tools and would use a wrench and act like she was fixing something. I wish I had more pics of her working on it so I could show them to her when she is older.

    99 SILVERADO, 5.3, CATBACK EXHAUST DUMPED, K&N COLD AIR INTAKE

  8. #8
    Join Date
    Jan 2008
    Posts
    8,031
    nice truck,i like the hood,that ss style hood would sell like crazy if they offered it

  9. #9
    Join Date
    Apr 2009
    Location
    Houston
    Posts
    384
    great job dude!
    2000 Yukon Xl


    2003 Sierra Denali Quadrasteer

  10. #10
    Join Date
    Apr 2008
    Location
    newburgh, NY
    Posts
    512
    Looks good.
    What hood is on the truck in your signature?
    Step 1. crus at it.
    Step 2. get a hammer.
    Step 3. torch it.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts