Quote Originally Posted by texasRSTsilverado View Post
ok service but im not too happy with nelson's product at all. First off it took almost a month to get my harness. Second, I ordered the engine harness and e-fan harnesses assuming that all the accessories plugs and whatnot would be on a complete harness. Wrong! i essentially paid out the ass for a few pieces of wire and some plugs. I had to splice my old factory harness in to make everything work right and im still working out kinks in it. I was not expecting this and it added hours of work to the swap. I was hoping it would be a simple plug and play by ordering it from them. If I had known that it was not a complete harness I would have never bought it from them and I would have either bought from painless or made my own as it would have been cheaper, better and quicker!
What exactly do you expect? A harness from Nelson clearly states that it is plug and play. Do you expect him to go over every vehicle with a fine tooth comb from miles away and get every single gauge and electronic thing that you have wired(that he may or may know about, considering the aftermarket)? You DO have to put in a little work to get some of the things going. Not all wiring is going to be identical if you're swapping an engine. Some wires may need to be longer for one person than for another. I'm not trying to be a dick or anything here, but take a little ingenuity and wire the few remaining things yourself.