which a/c relocation bracket?

[MrEd]

Not that this is model specific, buy which a/c relocation bracket has some of you guys used? I am doing a LS motor swap, what are my options? Is there any way that I can use my current compressor or use the LQ4 compressor.

Thanks. Mr.Ed

[RedHeartbeat]

that is a very model specific question. What are you swapping the engine into?

[93blackbeast]

I used a bracket from Kwik Performance. It bolted up great and looks great. I wasn't able to use the stock compressor though, as it required me to get a Sanden style compressor (SD5, SD7, 508, etc.).

But its on and works great.

S&P makes one but it is way more expensive and only comes in chrome...so if you're not all about the bling, it will stand out.

I'd go with Kwik again if I do another swap. It was easy and pretty cheap.

Thanks,

Cody B.

[ff_jeff]

I forgot were I saw one that allows you to keep the stock compressor... I saw it not that long ago. I think I might use it, If I can find it. lol

[oldcarstulsa]

i used the kwik perf one also, very simple and good people to deal with, bought it from current performance.

[92 6.0]

This is one way of using the factory compressor off of a 90s model.
MalibuRacing.com Message Boards • View topic - A/C Summary

[MrEd]

Thanks, a lot of good info!

[keniff]

josh powers on pt.net has a custom bracket kit that works on our OBS LSx swaps. AC bracket options for LSx swap - PerformanceTrucks.net Forums
he does great work, i bought his 3/8" adapter plates. very good machine work. good luck oh and you are able to use your stock compressor without having to change lines or anything.

[MrEd]

This is one way of using the factory compressor off of a 90s model.
MalibuRacing.com Message Boards • View topic - A/C Summary

sweet thats easy enough. can i also retain the factory compressor off of the 6.0.
Ed
STICKY!!!