+ Reply to Thread
Results 1 to 6 of 6

Thread: WTB: Locker for my '01 Silvy

  1. #1
    Join Date
    Jan 2009
    Location
    Texas
    Posts
    491

    WTB: Locker for my '01 Silvy

    just did the motor swap in my '01 Silverado RCSB and im already getting a little tired of the one-tire-fire BS. Im looking for a locker but not looking to break the bank. Let me know what you have any how much..
    --'01 SCSB 2006 Full RST Conversion, Built 6.0L HO & 4L80E, **Always Under Construction**
    --'07 BMW 335i Coupe Dinan 3.0L Twin Turbo (My DD)
    Black On Black
    Built Not Bought

  2. #2
    Join Date
    Feb 2007
    Location
    Spring, Texas
    Posts
    1,739
    Quote Originally Posted by texasRSTsilverado View Post
    just did the motor swap in my '01 Silverado RCSB and im already getting a little tired of the one-tire-fire BS. Im looking for a locker but not looking to break the bank. Let me know what you have any how much..
    Look on Ebay at Ron's Machine. That's the cheapest I've seen for a new Eaton or Detroit Tru Trac.

    2004 Silverado Crew Cab, forged iron 5.7, STS w/MP turbo, 10+ psi, FMIC, Tial 50mm BOV, Vic Jr, Snow performance meth, MTI Stealth cam .220/.220 .581/.581 115lsa, Comp chromoly pushrods, Yank TT3000 stall, LS1 Efans, 160 tstat, Trucool 40k trans cooler, 60# injectors, Walbro fuel pump, Patriot springs, Built 4l65E w/billet input & output shafts, Eaton posi, SD tuned...all installed by Klein North Automotive

  3. #3
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Did you get the tune updated?
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  4. #4
    Join Date
    Apr 2008
    Location
    Okeechobee, Fl
    Posts
    2,007
    Quote Originally Posted by ramair2002 View Post
    Look on Ebay at Ron's Machine. That's the cheapest I've seen for a new Eaton or Detroit Tru Trac.
    +1 thats where I got mine! Cheapest place around!
    2006 extended cab, 6.0 swap, full bolt ons SOLD
    2011 ECSB, 6.2, 6 spd, 3.73, 5" lift, 33" nitto, limo tint, debadged, volant CAI, muffler delete, black bear tune 14.0 @ 98 on the 33'sSOLD
    2007 TBSS AWD, cam, stall, built trans, N2OSOLD
    2006 RCSB cammed LQ9, full exhaust, 3200 stall, 2-4 drop
    Quote Originally Posted by farmtruc View Post
    "if i have to explain, you don't get it"

    49 Ford F1
    355 chevy / turbo 350 / 12 bolt posi / camaro subframed

  5. #5
    Join Date
    Oct 2005
    Location
    drinking your alcohol
    Posts
    2,967
    alex go with that tru-trac or locker that i was tellin you about...

    and i talked to the guy about the installs, he still does them on the side
    Quote Originally Posted by DamnYankee View Post
    lol...I wish you would never paint your truck...I bet it bugs them that much more that a primered up truck just soggied his Wheaties. good job buddy
    sprayedenali: i like catching, but not fishing
    DBTBSS: bring Tyler... we need someone to make fun of
    MidnightRider: your right im gay
    DamnYankee: my nana failed
    DamnYankee: confused...if it can't keep up to begin with, how can it keep up
    mitch cobb racing: ya, allen played with it for a while, HUGE difference

  6. #6
    Join Date
    Jan 2009
    Location
    Texas
    Posts
    491
    Quote Originally Posted by TxStVanWilder View Post
    alex go with that tru-trac or locker that i was tellin you about...

    and i talked to the guy about the installs, he still does them on the side
    ya, this is going to be my next purchase i think. im not looking to spend too much on one. my truck is now my DD so I cant afford to keep tearing through tires. It needs a locker bad. alan you need to come check out the truck now since i got done with the motor swap..
    Last edited by texasRSTsilverado; 08-28-2009 at 10:06 AM.
    --'01 SCSB 2006 Full RST Conversion, Built 6.0L HO & 4L80E, **Always Under Construction**
    --'07 BMW 335i Coupe Dinan 3.0L Twin Turbo (My DD)
    Black On Black
    Built Not Bought

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts