There's one way to find out, pull it.
There's one way to find out, pull it.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
allready i bought the GT2-3 lingenfilter camOriginally Posted by RedHeartbeat
and i'm waiting to collecet all the thing that i need the i will take it to the garadge
the remaining is >> TCI kit
fuel inj.. 42 or higher
fuel pump
elec. fan
and i'm thinking to get smaller pully for higher boost , but i'm little fread to do it
beacouse in in middle east and the normal temp. now 40C
__
how many PSI do U thing i could reach but in safety mode?
i planning to get 10-13 psi
Thats a lot of boost for an LQ9. I would safely go 8 PSI if it were me. More than that you're in danger of killing stock pistons. You really need a forged set of pistons and drop some compression to run high boost with a supercharger.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote