yup
but still the same
the tuner said maybe the camshaft is not the stock one.
yup
but still the same
the tuner said maybe the camshaft is not the stock one.
There's one way to find out, pull it.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
allready i bought the GT2-3 lingenfilter cam
and i'm waiting to collecet all the thing that i need the i will take it to the garadge
the remaining is >> TCI kit
fuel inj.. 42 or higher
fuel pump
elec. fan
and i'm thinking to get smaller pully for higher boost , but i'm little fread to do it
beacouse in in middle east and the normal temp. now 40C
__
how many PSI do U thing i could reach but in safety mode?
i planning to get 10-13 psi
Thats a lot of boost for an LQ9. I would safely go 8 PSI if it were me. More than that you're in danger of killing stock pistons. You really need a forged set of pistons and drop some compression to run high boost with a supercharger.![]()
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709