did you maybe pinch the wiring between the bellhousing and the block? Don't ask me how I know to check this.
You did connect the crank sensor connection just above the starter? Didn't damage the wires while dropping the starter? Don't ask me how I know.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Did you remember to connect the cam sensor behind the intake manifold?
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
actully i checked everything i changed the camsensor twice even the cranksensor
but what do u mean about (( pinch the wiring between the bellhousing and the block ))??
didn't have the cam sensor wires clear when installing the engine and smashed the wires when the transmission was bolted to the engine and broke wires inside the shielding. Engine wouldn't start when this happened. Have you checked for 5v at the sensors with the key on? Do you have all the grounds connected to the block?
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote