I believe its something in the wires too. The po that had it replaced the intake gasket at one time and i know that the dizzy was turned more towards the carb than it should be im thinking that maybe its a little off and that he had the wires moved onto diffrent posts for it to work correctly. Any that ive ever done the 8 and 1 wire are the front two on the dizzy and thats the way i reconected them. Im gona go back through tomarrow and move all the wires over one post each way and see if it starts if not ill pull the dizzy and start over. While ive got it out it will be a good chance for me to go ahead and replace the leaky intake gaskets.