what's the point in doing the doors? is this a stereo thing or wind noise thing? i have a GIANT roll i bought for the camaro i won't be needing![]()
what's the point in doing the doors? is this a stereo thing or wind noise thing? i have a GIANT roll i bought for the camaro i won't be needing![]()
blown transmissions are about as useful as 97% of the guys on this forum
the point in doing the doors is to eliminate rattle and get better mid-range sound from the mids. it helps eliminate distortion and outside noise too. if applied to the entire cabin of the vehicle you should have little to no rattles.
2005 black Yukon XL SLT - traded in for me wife's new Fusion (GM sucks these days)
2002 black Yukon SLT (the skinny sister)
1969 green Pontiac GTO (Layla, AKA the black sheep)
INSTALLS AND MORE.. http://www.ls1truck.com/forums/my-ga...-low-life.html
Sticky/broken gauges? I can help. PM me for details.
If you have speakers in your doors, deading them makes them sound MUCH better as the sound won't bleed out thru the doors and the doors wouldnt rattle or vibrate as much.
Stinger Roadkill FTW
http://www.ls1truck.com/forums/audio...end-party.html
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
hmm... my driver door rattles a little with windows down but i've never noticed anything with them up.
Guess between exhaust/radio, never really payed attention.
blown transmissions are about as useful as 97% of the guys on this forum
I have the outerskin layered as well as the inner, probably two layers thick on the back wall to help eliminate the exhaust sound coming in the truck. From my experience there isnt a point where you can put too much on, it might not be cost effective but it makes a difference.
2011 4x4 6.2 Silverado ltz 6" fabtech lift 20" XD spy 35" nitto mud grappler
well i guess i'll do the doors for now, and ill have to order more to do the roof and floor
R.I.P Blue '02
'08 - 5.3
Vette Servo, Flowmaster 40
I believe its the actual door panel. Doesn't seem to snap in at the top like the passenger side does. I've tried re-installing it 4-5 times, I just learned to deal with it. Thanks tho
blown transmissions are about as useful as 97% of the guys on this forum
A bit of personal opinion:
Dynamat is ridiculously overpriced and not even the top of the line anymore. For as good as it performs you might as well go with raammat or something much cheaper that is just as good.
Sound Deadener will reduce rattles and enhance acoustics, but it will do very little for road noise. If you want to decrease road noise I would recommend a closed-cell foam material like ensolite. Lay a layer or 2 or 3 on the floor and back wall and it will help greatly with road noise. I think RaamMat Also sells ensolite.
For those who don't know ensolite is basically that foam stuff the nice floaty blue pool chairs are made out of
ya i forget the name of the stuff I got, it's heat deadening as well as sound deadening. mainly for the cab of high end race cars...wasn't cheap. The roll is is in a box about 10 inches by 10 inches by 18 inches and weights like 90 lbs.
blown transmissions are about as useful as 97% of the guys on this forum