+ Reply to Thread
Results 1 to 10 of 33

Thread: Enlighten me

Hybrid View

  1. #1
    Join Date
    Sep 2005
    Location
    Austin Tx.
    Posts
    13,138
    I was thinking the CVs as well. That's another thing my buddy said that I don't have a straight axle. He was like if you have the CV joints then you don't have a straight axle. IDK this whole argument between us was alcohol fueled anyway so who knows haha
    1951 3100
    1984 C10

  2. #2
    Join Date
    Jun 2008
    Location
    Georgetown, SC
    Posts
    148
    David I had a buddy with the same jeep just not outlander, and his CV's were toast when he bought it. It made a noise similar to what you're explaining on both sides. I would give em a good look over before I went any farther.
    John
    Four by Four to the floor.

  3. #3
    Join Date
    Sep 2005
    Location
    Austin Tx.
    Posts
    13,138
    Quote Originally Posted by jsprevat View Post
    David I had a buddy with the same jeep just not outlander, and his CV's were toast when he bought it. It made a noise similar to what you're explaining on both sides. I would give em a good look over before I went any farther.
    How much did it cost to replace the CVs? Doing the work yourself that is..
    1951 3100
    1984 C10

  4. #4
    Join Date
    Jul 2008
    Location
    Racoon Twp., PA
    Posts
    1,572
    2002 JEEP GRAND CHEROKEE Constant Velocity (CV) drive axle

    Obvioulsy you would want new. I thought they cost mroe than that though. I would guess 50-100 depending on supplier then.

    Real simple, wheel off, brakes off, 32 or 36 mm axle nut off, remove wheel bearing (3 14 mm 12 point bolts), slide axle out and reassemble with new part. Prob 1 hr per side.
    2013 CC 5.3
    81 C10 LS1 project

  5. #5
    Join Date
    Sep 2005
    Location
    Austin Tx.
    Posts
    13,138
    Quote Originally Posted by tanz45 View Post
    2002 JEEP GRAND CHEROKEE Constant Velocity (CV) drive axle

    Obvioulsy you would want new. I thought they cost mroe than that though. I would guess 50-100 depending on supplier then.
    Thanks for the link. Are they hard to change out?
    1951 3100
    1984 C10

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts