+ Reply to Thread
Page 3 of 10 FirstFirst 1 2 3 4 5 ... LastLast
Results 21 to 30 of 93

Thread: Thumpr cams

  1. #21
    Join Date
    Jun 2009
    Location
    Glennville
    Posts
    152
    Quote Originally Posted by STUNNA View Post
    yup i ran it w/o stall or 4.10s and it ran fine.
    good im pretty much set on the thumper and a 3600 stall now..

    5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune

    Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,

    soon to come a little shot of nitrous

  2. #22
    Join Date
    Jun 2009
    Location
    Glennville
    Posts
    152
    the ls hot cam sounds good but i really like the sound of that thumpr

    5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune

    Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,

    soon to come a little shot of nitrous

  3. #23
    Join Date
    Nov 2008
    Location
    savannah ga
    Posts
    327
    im running the tr220, and i have to say that the power increase was pretty impressive. very happy with cam, but will probally be swapping soon because i am going fi.
    Master power t-76 kbracing, Intercooled, 11psi, tr220 cam, patriot dual springs, 72lbrs, snow meth, walbro, efans, 80e, tansgo, yank 3200.

  4. #24
    Join Date
    May 2009
    Location
    GA
    Posts
    553
    Quote Originally Posted by mwbrannen View Post
    oh an thanks for sending me here trev ive been on all day at work at done crap lol
    lol this is where ive been spending my time learning to do my v8 swap. now i just gotta pay to play

  5. #25
    Join Date
    Jun 2009
    Location
    Glennville
    Posts
    152
    does any one have the parts number to the ls6 vavle springs?

    Stunna, did you use a hardend pushrod? is there anything eles i should replace why im in there, lifters,rockers, timing chain? hell i dont kno

    5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune

    Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,

    soon to come a little shot of nitrous

  6. #26
    Join Date
    Jun 2009
    Location
    Glennville
    Posts
    152
    GM part number 12499224??? yellow valve springs with retainers??

    5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune

    Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,

    soon to come a little shot of nitrous

  7. #27
    Join Date
    Jan 2008
    Posts
    8,031
    no u just need to change them springs,i used my stock pushrods,they worked fine.

  8. #28
    Join Date
    Jan 2008
    Posts
    8,031
    Quote Originally Posted by mwbrannen View Post
    GM part number 12499224??? yellow valve springs with retainers??
    yea thats the part number,no need for retainers,use your originals,your going to need the ls7 cam sprocket with 3 bolts.

  9. #29
    Join Date
    Jun 2009
    Location
    Glennville
    Posts
    152
    i got that part number off ebay for like $60 i get springs and retainers

    5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune

    Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,

    soon to come a little shot of nitrous

  10. #30
    Join Date
    Nov 2008
    Location
    savannah ga
    Posts
    327
    I dont see the since in not changing them since you have to pull them out anyways, and your only talking $120 bucks of insurence
    Master power t-76 kbracing, Intercooled, 11psi, tr220 cam, patriot dual springs, 72lbrs, snow meth, walbro, efans, 80e, tansgo, yank 3200.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts