01 ecsb 2wd
Front:
4" fabtech spindle
3" fabtech spring
Rear:
5.5" Procomp block
2" Procomp add-a-leaf
Shoes:
285x75x16 on mickey 2's with a HUGE offset (stock wont clear spindles)
Clears 35's with lower valance off (I hated that thing anyway)
![]()
01 ecsb 2wd
Front:
4" fabtech spindle
3" fabtech spring
Rear:
5.5" Procomp block
2" Procomp add-a-leaf
Shoes:
285x75x16 on mickey 2's with a HUGE offset (stock wont clear spindles)
Clears 35's with lower valance off (I hated that thing anyway)
![]()
Last edited by oleshifty; 06-18-2009 at 12:54 PM.
blown transmissions are about as useful as 97% of the guys on this forum
front 12''
2'' DJM spindles
Slam Specialties RE7''
shock QA1 SA
245/40/20
Rear 15''
4 link
Slam Specialties RE7''
KYB gas adjust
295/35/22
Total 12/15 drop...
![]()
Last edited by DBRODS; 06-18-2009 at 10:21 PM.
2 inch Belltech drop spindles in front
2 inch DJM lowering shackles and 2 inch DJM lowering hangers in back
245/70/16 Cooper Discover's
I also have helper bags in the back that have to have at least 10psi in them. So that keeps the back up a hair higher. I have to have them for when I have my bike in the back.
Front:
Mcgaughys spindles (2")
DJM torsion keys (1")
Rear:
DJM shackles and hangers(4")
Overload swapped for an f150 over load (1")
265/35/22 tires
Belltech nitro drop II shocks at all 4 corners
Total 3/5
2004 Gmc VHO (LQ9), AEM cai, perma cool e-fans, aero turbine 3535,obx lt's,undedrive pulley w/overdrive alt pulley, lingenfelter 160 t-stat, zippy tune, taylor 10.4mm wires, tb bypass, Transgo HD-2 c, corvette servos, sonnax accumulator piston's,2600 stall,30,000 trans cooler lowered 1.5"/2", boss 313 22's on 285/45's, rollpan,shaved tailgate w/ss spoiler, painted interior, 2 solo l7 12's,custom fiberglass box,Pioneer F-900 Navi,SSS gauges,billet shiter and pedals,hid's (low's and fogs).