a friend is trying to do the crank relearn process in my truck with a VERUS Snap-on device.. well he goes thru all the steps Verus ask him for, then it ask for full throttle and he gives full throttle all the way up to the rev limiter, but the device keeps saying "waiting for full throttle"
what can be the issue here??
06' Silverado RCSB 5.3L 4wd..
PERFORMANCE: Cam, Springs, Pushrods, P&P heads & 3 angle valve job, Injectors, PS LT's & ORY, Nelson Tune, Catback, CAI, Comp Cam Double Timing Chain, HP Oil Pump, UD Pullies, ARP bolts, Stall, TBS, 4.10's, Iridium NGK's, G-80, 160 t-stat, HD-2 & Vette Servo, 46,000 tranny cooler, 75-125hp shot of funny Gas..
HID's Hi, Lows & Fogs
Waiting to be installed: LC-1 WB & Standalone system
see if it will see full throttle in just scan mode or what ever snap on calls it.
Step 1. crus at it.
Step 2. get a hammer.
Step 3. torch it.
Never tried it with anything but a TechII.
We do a lot of tunes, so we get a lot of calls about this.
Try this:
Be sure the device is up to date, this is usually the main cause.
A/C off.
Emergency Brake applied.
Brake Pedal applied during process.
Engine warmed up.
Steady Idle.
If this doesn't work, it's the device you're using.
Hope this helps,
allen
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
Sounds like you need to disconnect the battery, unplug the TB sensor, hook the battery up, turn the key on for about 30 seconds, turn the key off, hook up the TB, turn the key on, cycle the accelerator pedal from idle position to WOT 5-6 times, key off for 30 seconds, key on and start and then do the crank learn routine. Its something like that, just trying to remember the cycle.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
BTW, put your location in your signature so that if someone near you has HPT they could possibly contact you to try and help you with the crank relearn.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
A freind of mine has the same Crap-on and it does the same thing. All you have to do is snap the throttle one more time and its done..IDK why, but I will call in the morning to verify.. We just did one a few months ago.
Posting Permissions
Reply With Quote
