I think you got a little ahead of yourself on this one. There's literally hundreds of years of experience amongst all the members on here...all you have to do is ask the question (or use the search function). The combo of too big of a cam, too small of a stall, possibly a bad upload have all conspired against you...IMO
07 Z71 4x4, 6.0L, 3.73s, Turbonetics T76 @ 10 psi, 75 shot, Snow meth kit, PLX DM-100 wideband gauge, Nelson tune, Comp 212/216 .557/.561 114 lsa, 60# injectors, Yank 3000, 4L80E , Magnaflow - dumped, e-cutout
Line-X, Pace Edwards Full Metal Jackrabbit bedcover
put the stall if no difference im sure nelson will get you fixed up,good luck
I got the hotcam with a nelson tune and it runs crazy good. I noticed the way you have the cam described is different than I did. I put it as 219/228 .525/.525 112LSA Mines doesn't sound super cammed in drive either, but it idles great, starts right up and pulls like no tomorrow. I promise you, it's the best purchase you can do hands down. Hope things turn out better.
Mike
2000 RCSB
'05 LS2 11.5:1 C.R. l K&N l LT's l Torquer V2 l PAC Springs l Manley 7.4's l 92mm TB l LS7 Lifters l Circle-D 3200 l P&P TB l ARP Rod Bolts l LS1 E-fans l Nelson 93 Tune l Brand-X 100 Shot l Walbro 255 l Duals w/ X and Magnapacks l Vette Servo l Transgo S.K. l 30K Cooler l Detroit Tru-Trac l Motive 4.30's l ARP Cap Studs l TA Girdle
I have only heard good about nelson's tunes....i hope to get mine soon after i get my headers
ive bought probably 8 or 9 nelson tunes.
they have all been good to go. i have had to send one back for a little extra work. but thay have always been spot on.
01CamaroZ28
10.751 @ 124.26 mph with a 1.446 60ft
ALL THRILLS NO FRILLS!!!!
B&L Racing stg 1 heads 224/581 cam.
06 silverado 6.0L VMAX LPP LT's, Volant CAI, Manaflow, NELSON TUNE.
ya, nothing but success with Nelson Performance tunes and service. They will have my business from now on.
single digit street truck
for build info
http://www.ls1truck.com/forums/my-ga...cs-garage.html
The best advice I have ever heard:... Only take B( . Y . )ST advice from someone that is CURRENTLY running a turbo setup close to, or bigger than what you want......
i'm sure Allen will take care of it, just give him a little time.
X2 ON THAT MIC!Originally Posted by TurboMic
Nelson~Performance
I love my Nelson tune, and with my transgo hd-2 kit I am hitting nasty 2ond gear chirps....
1999 GMC Sierra SLE sc sb 4.8l 4L60E, Comp 1.75 roller rockers, graniaelli maf, garneaelli wires, Aem brute force intake, BBK 80mm tb, Nelson tune, 2/4 drop, Denali rims, custom grill, Denalli guages, Edelbrock IAS shocks, Tahoe E-fans, Nelson harness, and tune, McGaughy's 2" drop spindles, New matched coil springs, Air Lift rear lowerd air bag kit, Air Lift wireless remote
List of things to do
4.10 gears and a new posi, Lt headers, Cam, Heads, Intake,
Hello,
Please PM or email me with your name and number. Ill get back with you as soon as possible!
Thank you
Mel-
Tim,
I got your PCM, and your PCM is being sent out as we had discussed!
Thanks
Mel-
Her name is A Meli-
"If everything is under control, you are going too slow."- MA
Posting Permissions
Reply With Quote
