+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 17 of 17

Thread: help!!!!!!!!

  1. #11
    Join Date
    Dec 2008
    Posts
    14
    Pull the dist cap and check for corrosion on the inside, check the rotor and checl the coil terminal for corrosion. If all is fine RECHECK FIRING ORDER AND MAKE SURE IT'S 18436572. If it's good and only after you've checked it.....TWICE, get rid of those plugs and put in almost anything but bosch
    Old wrencheads never die, they just lose compression. I want a tatoo on my beer gut that says "alcohol injected"

  2. #12
    Join Date
    Nov 2008
    Location
    Spring, TX
    Posts
    2,228
    +1 for getting rid of Bosch. I had a bad plug wire that was throwing a code. i replaced it with a Bosch wire and the code still came up. replaced it with a delco 1 and the code went away.
    '02 Silvy: Z71 EC Step Side 5.3L Nelson tuned
    2013 GMC Acadia: SLT1 Carbon Black
    1976 Corvette Stingray: Trying to save it, progress is slow.

    ^Ricky's Sweet PS Skilz
    09/21/2010 02:31 <danger_ranger83> I'm not really worried about the looks...I want it to be fast and ugly...bc no one wants to get outrun by something ugly

  3. #13
    Join Date
    Mar 2009
    Location
    AR
    Posts
    89
    Quote Originally Posted by banker099 View Post
    pull the plugs wires on by one and see which one is missin....then pull that plug and see if its firing
    Couldn't said it any better myself.

    (when you pull a wire and the engine doesn't change then thats the culpret)

    AND JUNK THEM BOSCH'S!!!!!!!!! I ran a parts store for 2 years and NEVER had a satisfied customer who bought them paper weights.

  4. #14
    Join Date
    Jan 2009
    Posts
    155
    i had nw plugs and wire be bad out of the box. i would pull one wire at a time while idling to find the misfire. bosh is junk

  5. #15
    Join Date
    Sep 2008
    Location
    southside VA
    Posts
    684
    check ur plugs...oh and dont change ur buddys plugs anymore lol

  6. #16
    Join Date
    Oct 2008
    Location
    Killeen, TX
    Posts
    170
    +1 Junk the bosch. Go with AC Delco or NGK or Nippen's but no bosch.


    2007 Chevy Silverado Classic 4.3L V6
    Magnaflow Muffler, CFM Technologies CNC Machined High Flow Vortec Throttle Blades, STS Rear Turbo, Intercooler, Accell Distributor and Coil, 8mm wire, Autolite Platinum plugs, Runs out of fuel at 4000RPM. Marine intake with larger injectors soon. Hoping to squeeze 10psi.

  7. #17
    Join Date
    Mar 2009
    Location
    Wichita Falls, TX
    Posts
    2,172
    bosch=junk
    2005 black Yukon XL SLT - traded in for me wife's new Fusion (GM sucks these days)
    2002 black Yukon SLT (the skinny sister)
    1969 green Pontiac GTO (Layla, AKA the black sheep)

    INSTALLS AND MORE.. http://www.ls1truck.com/forums/my-ga...-low-life.html
    Sticky/broken gauges? I can help. PM me for details.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts